Some simple tools and a little bit of time are all you need:
- Saw (hand or chop saw)
- Glue (Liquid Nails® or similar)
- Hammer
- Finish nails
- Measuring tape
- Spackle®
- Caulk
1. Measure and Cut
Mount the first two of our matching corner blocks. Measure the distance between the two blocks and cut the molding to the appropriate length.
2. Glue
Apply the glue to the corrugated section of the molding. The corrugation helps increase contact area and keep the glue spread nice and tidy.
3. Nail
Nail the molding against the wall in an inconspicuous place. Fill in the nail hole with spackle, and apply caulk to the gaps between the wall/ceiling and molding.
You're done!
Check out our installation tips if you need more help.
